BL450 series
Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
Designed and engineered by Kenwood in the UK
Made in China
19144/3
Important - UK only
The wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
to use your blender
1 Fit the sealing ring ብ - ensuring the
seal is fully located under the rim of
the blade unit.
●
●
●
●
Leaking will occur if the seal
The appliance must be protected by
a 3A approved (BS1362) fuse.
is damaged or incorrectly
fitted.
2 Screw the blade unit onto the goblet
ᕡ. Refer to the graphics on the
underside of the blade unit as
follows:
Note:
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit and turn clockwise to lock ᕢ.
●
If a non-rewireable plug is cut off it
must be DESTROYED
●
The appliance won’t work if
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended speed chart).
●
hints
●
To blend dry ingredients - cut into
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep your
hand over the opening. For best
results empty regularly.
key
●
The processing of spices is not
blender
filler cap
recommended as they may damage
the plastic parts.
ቢ
ባ
ቤ
ብ
ቦ
ቧ
ቨ
ቩ
locking lid
goblet
sealing ring
blade unit
speed + pulse control
power unit
cord storage
mill (if supplied)
mill jar
●
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole in
the lid.
●
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
ቪ
ቫ
storage lid
3
3 Turn the blade unit ቦ upside down.
Lower it into the jar, blades down ᕣ.
Turn anti-clockwise to lock.
4 Place the mill onto the power unit
and turn clockwise to lock ᕤ.
5 Select a speed or use the pulse
control.
to use your mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring ብ - ensuring the
seal is fully located under the rim of
the blade unit.
●
Ensure that the seal is fitted
6 After milling, you can replace the
blade unit with the storage lid.
correctly.
recommended speed chart
speed usage/food items
max. quantity
1
Frothing milk
1 litre
Light mixes e.g. batters, milkshakes,
scrambled egg
1 litre
2
Soups & drinks
Thicker mixes e.g. pâtés
1.6 litres
Mayonnaise
3 eggs + 450ml
oil
Smoothie drinks
Place the fresh fruit and liquid ingredients in
first (includes yoghurt, milk and fruit juices)
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
800ml
liquid
Mill - use for dry ingredients only
Herbs, nuts and coffee beans
50g
(P)
Operates the motor in a start/stop action. The
pulse pulse will operate for as long as it is held in
position.
Ice crushing - operate the pulse in short bursts
until crushed to the desired consistency.
6 cubes
blade assembly
1 Remove the blade unit from the
goblet or mill by turning to the
care and cleaning
●
Always switch off, unplug and
dismantle before cleaning.
unlock position
to release.
●
Empty the goblet before unscrewing
it from the blade unit.
Don’t immerse the blade unit in
water.
Do not place any parts in the
dishwasher.
2 Remove and wash the sealing ring.
3 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the
blade unit in water.
●
●
4 Leave to dry upside down.
power unit
●
Wipe with a damp cloth, then dry.
other parts
●
Don’t immerse the power unit in
Wash by hand, then dry.
water.
●
Push excess cord inside the back of
the power unit.
4
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
UK
If you need help with:
using your appliance or
servicing, spare parts or repairs (in or
out of guarantee)
టcall Kenwood customer care on 023
9239 2333. Have your model
number (ie BL450) and date
code (4 digit code ie 6T41)
ready. They are on the underside of
the power unit.
●
2002/96/EC.
●
At the end of its working life, the product
must not be disposed of as urban
waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need to
dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
●
spares and attachments
టcall 0870 2413653.
●
other countries
Contact the shop where you bought
your appliance.
●
Designed and engineered by
Kenwood in the UK.
Made in China.
●
guarantee (uk only)
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
●
you have not misused, neglected or
damaged it;
●
it has not been modified (unless by
Kenwood);
●
it is not second-hand;
●
it has not been used commercially;
●
you have not fitted a plug incorrectly;
and
●
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
5
carrot and coriander
soup
25g butter
50g onion chopped
1 clove garlic crushed
1
640g carrot cut into 1 ⁄
2
cm cubes
cold chicken stock
10-15ml (2-3tsp) ground coriander
salt and pepper
1 Melt the butter in a pan, add the
onion and garlic and fry until soft.
2 Place the carrot into the liquidiser,
add the onion and garlic. Add
sufficient stock to reach the 1.6 L
level marked on the goblet. Fit the lid
and filler cap.
3 Blend on maximum speed for 5
seconds for a coarse soup or longer
for a finer result.
4 Transfer the mixture to a saucepan,
add the coriander and seasoning
and simmer the soup for 30 to 35
minutes or until cooked.
5 Adjust the seasoning as necessary
and add extra liquid if required.
6
|